Product Idea |

Portal 2: Test Chamber Creator

215 comments
On

Bendy!

It's been a while since the last update on this project, but I still wanted to share some more additions to the project! Based on the stick figures seen throughout Portal 2, this figure uses the Gingerbread man’s headpiece backwards to give Bendy his round head.


On

Reloaded...

It's been a while since the last proper update. Sorry about that, I've just been very busy working on other projects and work IRL. This update was planned to come out a lot earlier (Reloaded's release date to be exact), but due to some issues with my Laptop and other projects taking the center stage I had to push it back a bit.


To celebrate the release of Portal: Reloaded, I've chosen to recreate the game's most stand-out addition, the Time Portal. I've tried my best to replicate the Portal's design using the same style as my other 2 portal designs. If you want to check this amazing fan-game out, follow this link here: https://bit.ly/3i402Xu

On

A new Project has entered the Station!

Sorry for the very little activity on this project. It's because I've been very busy working on my newest project! My Thomas the Tank Engine project is now LIVE on Lego IDEAS. If you're interested in supporting this project, click on my profile or follow this link: https://bit.ly/2Ruzxzp


On

Excursion Funnel

It's been some time since my last update of this project, but I thought this project due for some more Aperture licensed equipment. This design for the Excursion Funnel is actually less of an module and more of an accessory similarly to the portals and sign and can be placed on any studded surface. Off course, these funnels can't actually transport your test subjects (though I did try with little result), but I did try my best to replicate the effect in Photoshop.

Although new supporters have slowly come over the last couple of weeks, I do still want to thank everyone so much for your support of this project. Having hit the number that we have, I couldn't have been more satisfied with how far we've come!!!


On

Doing some redecorating

At last, to celebrate us hitting the milestone of 1K supporters (1300 as of right now!), I've given the project a bit of an overhaul and given it an all-new look. It's now been over a month since I've submitted this idea and I couldn't be happier with how far we've already come!!! I hope you guys like the new look and I can't wait to see where this project leeds us next :D


On

Thank you for 1K supporters!!!

WOW!!! We gained 1K supporters in just a month, thanks to you guys choosing to support this project. Sorry for the delayed update, it means a lot to me that all the work I put into this project has been worth it. I was hoping to share something I've made for us hitting this Milestone, but let's just say that will have to wait another few days ;)


Keep sharing and spreading the project with your friends and family. Once again, thank you all so much!!!


On

IRL figure test!!!

Another quick bonus update seeing as we are nearing the 1K. I recently purchased parts for some of my other projects and due to their piece counts, I thought I would buy some extra parts to build and test the figures featured in this set. After having played around with these for a couple of days, I couldn't be happier with how they turned out.


The Turret might as well be my favorite part of this entire set because its design is so small yet accurate to its in-game look. They do seem to tend to lean to the side a bit, but I don't see that as a large problem. Atlas and P-body are very much the same to me. Whilst I do think their articulation could be improved upon, I couldn't be happier with how they look.


Once again, thank you so much for the support and positive feedback you've given me over the past month. We are so close to the 1K so don't forget to support and share the project with your friends and other Portal fans!!!


On

Defective Turrets (500 supporters!!!)

I was asked by a commenter if I was planning to add more turret variations and whilst the rocket turret is still in development, I wasn't expecting this project to hit the 500 mark so quickly. Instead, here is another turret variation, the Defective turret. This design for the Defective turret is mainly a recolor of my standard turret design, using transparent pieces to replicate the turrets emptier look.

Again, thank you so much for supporting this project. I can't believe that we've gotten this far after only 10 days and can't wait to see when we might hit the 1K milestone.


On

Unused images...

Another quick update, first of all, to thank you for the 200+ supporters, but also to share these unused images which were just barely left on the worktable. These images show the 3 play features included in the set and which I mentioned in the description, specifically the Cube Dropper, Aerial faith plate and the elevated platform.


These were actually part of the original submission, but due to 2 of the images not being sized correctly according to the IDEAS guidelines, I choose to remove all of them. I do hope to add these images to the project in a future update, but it along with the rest of the project would need to go through some modifications.


On

100 Tests completed already!?!?

I can't believe that after only 24 hours we would've already hit our first milestone, 100 votes!!! Everyone who has supported this project deserve a big thanks for all the positive comments and support. Also, don't forget to share this project with your friends and/or fellow Portal fans to bring this project even closer to becoming an official set! Now that we've been givin even more time to expand on this project, I can't wait to see when we will hit the next milestone...

Opens in a new window