Help your fellow builder by leaving your feedback based on these three criteria:
- Originality: How original is this - never seen before?
- Building Techniques: How much skill do you think the creator of this MOC has, in terms of building technique?
- Details: Express how much you like the details of the build.
Your feedback is only shown to the creator as well as yourself. It is not available for other users to see. The creator won't see your user name.
This is the SERMMOS 105 (Service and Maintenance Motorized Support Vehicle) from Orkov-Skargaard Industries. The 105 Series is fitted to function as delivery platform for fuel cells and other heavy duty parts for construction vehicles, aircraft, spacecraft and mechs - any industrial strength situation.
SERMMOS 105 schematics
1 - Cargo hold
2 - Safety lights (flashes during operation)
3 - Ladder
4 - Control interface readout (allows for manual control)
5 - Fuel pod and fuel hose access
6 - All terrrain tracks
7 - Vorger 5000 series Loader Robot with full sensor array. Handles all loading claw operation.
8 - Mason-Orkov 600 series CargoGrab with gravity clamps.
9 - Shock damper system
10 - Brake lights
11 - Safety lights (flash green when safe - red during operation)
12 - Vorger 5000 series extended sensor array
13 - Wrench (for those industrial-strength needs)
14 - Communication gear (blue light flashes on incoming messages)
15 - Front lights
16 - Fuel cells (cargo example)
17 - The gravity clamp "digits" of the Mason-Orkov 600 CargoGrab
****
Full set of photos available on Flickr
http://www.flickr.com/photos/bannerninja/sets/72157629288167383/
My idea here was to create a fun little support vehicle that was tracked in a 3-wheel mode and which could deliver cargo from its cargo bed using a robotic grabbing arm. Rather than going for a standard crane grab, I thought it could be fun to create an arm that featured a large scale robotic hand that could manipulate the cargo unto the right place.
I went for the traditional yellow colour scheme of construction vehicles but had to divert a few places due to lack of bricks in the right colour :)
The vehicle could fit almost any setting - current day or space.
SERMMOS 105 schematics
1 - Cargo hold
2 - Safety lights (flashes during operation)
3 - Ladder
4 - Control interface readout (allows for manual control)
5 - Fuel pod and fuel hose access
6 - All terrrain tracks
7 - Vorger 5000 series Loader Robot with full sensor array. Handles all loading claw operation.
8 - Mason-Orkov 600 series CargoGrab with gravity clamps.
9 - Shock damper system
10 - Brake lights
11 - Safety lights (flash green when safe - red during operation)
12 - Vorger 5000 series extended sensor array
13 - Wrench (for those industrial-strength needs)
14 - Communication gear (blue light flashes on incoming messages)
15 - Front lights
16 - Fuel cells (cargo example)
17 - The gravity clamp "digits" of the Mason-Orkov 600 CargoGrab
****
Full set of photos available on Flickr
http://www.flickr.com/photos/bannerninja/sets/72157629288167383/
My idea here was to create a fun little support vehicle that was tracked in a 3-wheel mode and which could deliver cargo from its cargo bed using a robotic grabbing arm. Rather than going for a standard crane grab, I thought it could be fun to create an arm that featured a large scale robotic hand that could manipulate the cargo unto the right place.
I went for the traditional yellow colour scheme of construction vehicles but had to divert a few places due to lack of bricks in the right colour :)
The vehicle could fit almost any setting - current day or space.
1 - Cargo hold
2 - Safety lights (flashes during operation)
3 - Ladder
4 - Control interface readout (allows for manual control)
5 - Fuel pod and fuel hose access
6 - All terrrain tracks
7 - Vorger 5000 series Loader Robot with full sensor array. Handles all loading claw operation.
8 - Mason-Orkov 600 series CargoGrab with gravity clamps.
Robograb in action
Operator and cargo
RoboGrab hand detail