Violin

Lego violin

The size is 63cm x 21.8cm in length and is similar to the actual 4/4 size violin(60cm x 21cm).

Total number of parts is 1,353.

[Body]
 -Wedge plates were used to represent the unique curves of the violin.
 -The side wall(rib) was designed with the 'brick with knobs' in the way stud was seen.

[Peg box and Scroll]
-Wedge plates and round plates were used to express peg box and scroll.
-For Peg, # 75904 Hammer was used.

[Finger board]
-Hinge plates were used to express the angle of the finger board

[String]
-Outer cables were used for strings. 256 mm and 96 mm outer cables are connected and they are naturally connected on the LDD
-In practice, 352 mm outer cables must be produced, or 256 mm and 96 mm outer cables must be connected to the connector peg(technic pin).

[Bow]
-The bow was designed using # 75535 part and tile

In addition, Chin rest, Bridge, tailpieace, tail gut, and end pin are also represented.